Poling Group News   |   Volume 7   |   Issue 1
The Poling Group at Tire Technology Expo 2016
The Poling Group is proud to be an exhibitor at the Tire Technology Expo 2016, February 16-18 in Hanover, Germany.
Please visit Booth #1018 to enjoy a fresh cup of espresso and learn more about the latest tire testing developments from the Poling Group. We're proud to announce the introduction of two new Poling Group products being released in 2016, the DB-111 | Dynamic Balancing Machine, and TWave | Tire Waveform Analysis Software. View the product overviews below and be sure to stop by our booth for more information on these or any other Poling Group product.
Email Sales@PolingGroup.com to schedule a personalized tour of Poling Group's innovative products or to discuss your unique tire testing or factory data requirements with a Poling Group representative during the show. We look forward to seeing you in Hanover!
[ Poling Group Web Site ]
[ Contact Information ]
DB-111 | Dynamic Balancing Machine - New for 2016!
We are expanding our line of tire test machinery with the development of the DB-111 Automated Dynamic Balancing machine, and it has the capacity to balance all tires processed by our CX111 TU Machine.

The new DB-111 is designed, like all Poling Group machines, with sound industrial-strength framework and the latest electrical and electronic components .Our flexible design provides the ability to balance all tires measured by a Poling Group PCR/LTR Uniformity machine.
Place the DB-111 behind a CX111 TU machine to provide a one source solution for Tire Bead Lubrication, Uniformity Testing, Optimization, Geometry, Balancing, Grading, Marking, and Sorting, in a fully automated line.
Stop by booth #1018 at the Tire Technology EXPO to find out more information about this exciting new offering from the Poling Group.
Or email us directly at Sales@PolingGroup.com
TWave | Tire Waveform Analysis Software - New for 2016!

Easily collect, visualize and analyze final finish tire test waveforms and harmonics.

Brand new Poling Group TWave software integrates with your existing plant database via ODBC. This new software plots harmonic information as a waveform view and transforms waveform data to individual harmonic magnitudes and angles. This process gives you unparalleled visualization and analysis of typical final finish data. Then overlay tire component splice and mold segment information on top of the waveform plot. Adjust individual harmonic magnitudes or angle values as needed and see the outcome instantly.

Replace your non-centralized custom spreadsheets with TWave and quickly view trend analysis, while you provide continuity from plant to plant.
Plots for visualization of tire data include: Complex, Individual Harmonic, Waveform, Harmonic Magnitudes, and Trend.

Stop by booth #1018 at the Tire Technology EXPO to find out more information about this exciting new offering from the Poling Group. Or email us directly at Sales@PolingGroup.com

Cold Slab Stock Cutting Solutions

For 70 years, Poling Group company Akron Steel Fabricators has produced well-designed mill room machinery that is strong, reliable, and most importantly, customizable.

Building on the success of our recent NG 1270 Slab Cutter/Feeder, Akron Steel Fabricator (ASF), a Poling Group company, has modernized a wide variety of cold slab stock cutting machines such as our Extruder Feed Systems (Tab Cutter), Mill Feed Systems (Zig Zag Cutter), Mixer Weigh & Charge Systems and Cold Slitter Applications.

This is in addition to our full line of Conveyors, Splice Presses, Let-Offs, Pull Roll Stands, Blister Breakers, Cooling and Drying Drums, Accumulators, Wind-ups, Control Systems, Calenders, and Custom Calender Rolls

Stop by booth #1018 at the Tire Technology EXPO to find out more information about Poling Group Mill Room equipment. Or email us directly at Sales@PolingGroup.com

Tire Data Acquisition
The most important step in any controls upgrade is to modernize the equipment, and aging data acquisition systems are no exception. These systems, currently populated with old electronic parts and designed with old paradigms, were once the mainstay of tire test machines. But with consumers and corporations increasingly demanding tighter specifications on tire testing, old electronics have failed to meet the new requirements many times over.
Enter the TDAQ. CTI’s TDAQ (Tire Data Acquisition) system is the leading data acquisition system in the world for Tire Uniformity testing. Designed exclusively for testing tires, the TDAQ electronics simultaneously acquire load cell data, spindle rotation, inflation pressure, and dozens of other machine variables—all with a fine 24-bit resolution and a processing rate of 16,000 times per second.
TDAQ comes in two versions: one 6 x 8 inch circuit board for handling general machine I/O, and one smaller 4 x 6 inch TDAQ-LC box specifically designed for load cell strain-gage amplification and measurement. The TDAQ system incorporates modern electronic design elements—such as adhering to electromagnetic compatibility fundamentals for high noise immunity—and is rated to CE approval standards. Its use of Ethernet-based data transmission allows it to be placed on the machine near the sources of the signals it measures. This feature greatly reduces both signal noise and the amount of field wiring, saving costs in both setup and troubleshooting. And TDAQ is durable: with over 275 currently in use worldwide, only 4 have ever failed.

Stop by booth #1018 at the Tire Technology EXPO to find out more information about new developments in tire data acquisition. Or email us directly at Sales@PolingGroup.com

ISO 9001:2008

The Poling Group companies Akron Special Machinery (ASM) and Commercial Timesharing, Inc. (CTI) are certified ISO 9001:2008 with Design.
View ISO 9001:2008 Certification

© 2016 Poling Group. All Rights Reserved     Phone : +1 330 753 1077      Online : www.PolingGroup.com      Email : Contact the Poling Group