the Poling Group Logo
Home  News / Events PG Newsletter Resources Site Map
Contact Info
   
Tooling

Electrical Controls

Geometry

Tire Positioning

Grinding

Marking

Other
 
 

Radial Runout Replacement Probes

Radial Runout Replacement Probes
The laser is packaged to directly replace ANY existing contact or non-contact sensors (capacitive, LVDT and DCDT). Compatible with any existing tire test controller because it is electrically/mechanically equivalent to the probe it replaces.

We supply mounting brackets to replace all types of contact probe mounts. A small printed circuit board provides electrical compatibility.
 
Using the supplied bracket, remove the old probe and install the laser. The printed circuit board creates an electrical output equivalent to output produced by the old probe. 

LRO Laser [ LMI Gocator 1320 ] RRO Laser [ LMI Gocator 1340 ]
Range (MR)
0.79" (20 mm)
Stand-off
1.57" (40 mm)
Laser Type
3R
Resolution
0.0000157" (0.0004mm)
Sampling Rate
32 kHz
Input Power
+24 to +48 VDC (13 Watts)
Operating Temp
32° to 120°F (0° to 50°C)
Housing
IP-67 (NEMA 6) Gasketed Aluminum Enclosure
Weight
1.76 lb (0.8 kg)
Output
RS-485 Serial, Selcom Serial, 1x Analog Output (4-20mA or ±15V)
Dimensions
1.18" x 4.72" x 5.87" (30 x 120 x 149 mm)
Range (MR)
6.4" (162.5 mm)
Stand-off
3.74" (95 mm)
Laser Type
3R
Resolution
0.0000394" (0.001 mm)
Sampling Rate
32 kHz
Input Power
+24 to +48 VDC (13 Watts)
Operating Temp
32° to 120°F (0° to 50°C)
Housing
IP-67 (NEMA 6) Gasketed Aluminum Enclosure
Weight
1.65 lb (0.75 kg)
Output
RS-485 Serial, Selcom Serial, 1x Analog Output (4-20mA or ±15V)
Dimensions
1.18" x 4.72" x 5.87" (30 x 120 x 149 mm)
You are requesting more information on
Product / Service
By Poling Group company
Do you have any specific questions about this product?
Your Contact Information
Your Name
Company
Email Address*
Phone Number
* denotes required field