the Poling Group
Product Catalog
|
Newsletter
|
Resources
|
Spare Parts
|
Contact Us
Company
About / Information
Contact
Management Bios
Poling Newsletter
Products & Services Catalog
Sales Literature & Learning Resources
Poling Group Divisions
ASM Division
Hasbach Division
ASF Division
CTI Division
Firwood Division
MSI Spare Parts
Machines
Laboratory Testing
Rolling Resistance
Tire Endurance
Tire Force & Moment
Run Flat
High Speed Uniformity
Tire Noise
Final Finish Testing
MCX75 Motorcycle TU
CX111 PC/LT TU
X150 Truck/Bus TU
DB111 Balance Testing
UFT111 Universal Flash Trimmer
AG2540 Agriculture Runout
TRM92 Tire Geometry
PGM Profile Generating Machine
Sidewall Grinder
Sidewall Painter
Automotive Testing
TWA-18 Tire/Wheel Assembly
Rim Runout
Millroom / Mixing
Slab Cutter/Feeder
S2S Series Slitter
Mill Blender
Batch Off Equipment
Calendering
Calenders
Calender Line Equipment
Cooling Drums
Curing
Post Cure Inflator
TU Options/Upgrades
Tooling
Precision Test Rims
Quick Rim Changeover
Electrical Controls
TDAQ-Tire Data Acquisition
TTOC6 Controller
TAIR-Tire Automatic Inflation Regulator
Mobile Panel
Encoder
Geometry Testing
TSAS-Tire Surface Analysis System
Laser Verification Wheel
Runout Transport
RRO Probe Replacement
Tire Positioning
Drive Roll Bead Lube
Auto-Adjust Width Chuck
Timing Belt Center Conveyor
Upper Spindle Assembly
Spindle Motor/Gearbox
Retractable Stripping Wheel
Retro-Fit Stripping Wheel
Anti-mischucking System
Sorting Elevator
Multi-level Sorting Conveyor
Grinding
Auto-position Shoulder
Auto-position Center
Grind Dust Removal System
Marking
Exit Station Marker
Hot Stamp Marker
Decal (LTA) Marker
Other
Calibration
Exit Drop Conveyor
Hydraulic Power Unit
Loadwheel
Loadwheel Cleaner
Frictionless Carriage
Loadwheel Motors/Drives
Remanufacturing
Machine Remanufacturing
Uniformity Machines
Laboratory Testing
Firwood Machines
Controller Upgrades
TDAQ-Tire Data Acquisition
WVC-Waveform Validation & Correction
MECC-Machine Effect Characterization and Compensation
Software
Factory Management
FFH-Final Finish Host
TFFIS-Tire Factory Floor Information System
Other Software
VIS-Visual Inspection System
TWave-Tire Waveform Analysis
PLCIO
TLM-Tread Label Management
Services
Poling Group Services
Spare Parts
Calibration
Installation/Start-up
Remote/On-site Support
Custom Engineering
Custom Software
☰
Tire Positioning
Tire Testing Options / Upgrades
Drive Roll Bead Lube
Our Drive Roll Bead Luber automatically handles a full range of tires arriving at the machine with no downtime for manual adjustment. Long-lasting steel drive rolls quickly and effectively center and lubricate each tire's bead to improve repeatability without sacrificing cycle time.
Auto-Adjust Width Chuck
Updated designs to the AAWC stem increase cycle life and reduce failure.
Timing Belt Center Conveyor
This versatile unit is superior to the old roller conveyor design for a wide range of tires, including light truck, low profile, high performance, regular passenger, and motorcycle tires.
Upper Spindle Assembly
Our patented "cartridge" design main spindle assembly, now a standard feature for all Poling Group final finish testing machines, makes it possible to completely replace a test machine spindle assembly in about 3 hours, greatly reducing changeover downtime.
Upper Spindle Motor / Gearbox
The Poling Group AC servo spindle drive and gearbox provide a smooth controlled transition between the forward and reverse directions during the testing cycle that is necessary to achieve excellent reverse direction repeatability.
Retractable Stripping Wheel
Our retractable Stripping Wheel uses THK style linear bearings to provide a rigid sliding member that resists side forces present when a tire is stripped from the test machine rim.
Retrofit Stripping Wheel
The improved retrofit design utilized “THK” style linear bearings to provide a rigid sliding member to resist the side forces present when stripping the tire from the tire machine rim and directly replaces the original design.
Anti-Mischucking System
This system uses photo-eye sensors and PLC logic to monitor tire position during chuck-up. Should the tire not center properly, the chuck retracts and then rechucks the tire to correct its position.
Sorting Elevator
The Poling Group elevator sorter can convey tires from a TU machine's exit conveyor to 4 different levels.
Multi-level Sorting Conveyor
Add a multi-level sorter to any testing machine to route tested or graded tires to specific downstream processing lines.
Five Divisions with One Goal ;
Remain a trusted, world-class supplier of tire testing, rubber machinery, and software to the tire manufacturing industry
©2023, the Poling Group. All Rights Reserved.